文章目录
一、安装简介
- 一、安装简介
- 二、在CentOS 7上安装Docker常用命令
- 三、执行过程：
-
- 1、卸载旧版本
- 2、安装依赖包
- 3、安装Docker
- 四、一键安装Docker
Docker 运行在 CentOS 7 上，要求系统为64位、系统内核版本为 3.10 以上。CentOS 7 的内核一般都是3.10的，而CentOS 6.X 的内核一般都是2.6，在2.6的内核下，Docker运行会比较卡，所以一般会选择升级到3.10版本。
二、在CentOS 7上安装Docker常用命令1、卸载掉旧版本的 Docker： yum remove -y docker docker-client docker-client-latest docker-common docker-latest docker-latest-logrotate docker-logrotate docker-selinux docker-engine-selinux docker-engine 2、执行以下安装命令去安装依赖包： yum install -y yum-utils device-mapper-persistent-data lvm2 yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo yum -y install docker-ce docker-ce-cli containerd.io # 若执行报错，则配置yum源 wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo 或一键安装Docker： curl -fsSL get.docker.com -o get-docker.sh sh get-docker.sh systemctl start docker systemctl status docker 3、检查版本 docker version docker info三、执行过程： 1、卸载旧版本
[root@lhrdocker ~]# cat /etc/redhat-release CentOS Linux release 7.3.1611 (Core) [root@lhrdocker ~]# docker ps bash: docker: command not found... [root@lhrdocker ~]# yum remove -y docker docker-client docker-client-latest docker-common docker-latest docker-latest-logrotate docker-logrotate docker-selinux docker-engine-selinux docker-engine Loaded plugins: fastestmirror, langpacks Repodata is over 2 weeks old. Install yum-cron? Or run: yum makecache fast No Match for argument: docker No Match for argument: docker-client No Match for argument: docker-client-latest No Match for argument: docker-common No Match for argument: docker-latest No Match for argument: docker-latest-logrotate No Match for argument: docker-logrotate No Match for argument: docker-selinux No Match for argument: docker-engine-selinux No Match for argument: docker-engine No Packages marked for removal2、安装依赖包
[root@lhrdocker ~]# yum install -y yum-utils device-mapper-persistent-data lvvm2 Loaded plugins: fastestmirror, langpacks base | 3.6 kB 00:00:00 epel | 4.7 kB 00:00:00 extras | 2.9 kB 00:00:00 updates | 2.9 kB 00:00:00 (1/7): base/7/x86_64/group_gz | 153 kB 00:00:00 (2/7): epel/x86_64/group_gz | 95 kB 00:00:00 (3/7): epel/x86_64/updateinfo | 1.0 MB 00:00:00 (4/7): extras/7/x86_64/primary_db | 194 kB 00:00:01 (5/7): epel/x86_64/primary_db | 6.8 MB 00:00:01 (6/7): updates/7/x86_64/primary_db | 2.9 MB 00:00:02 (7/7): base/7/x86_64/primary_db | 6.1 MB 00:00:00 Loading mirror speeds from cached hostfile * base: mirrors.aliyun.com * extras: mirrors.aliyun.com * updates: mirrors.aliyun.com Resolving Dependencies --> Running transaction check ---> Package device-mapper-persistent-data.x86_64 0:0.6.3-1.el7 will be updated ---> Package device-mapper-persistent-data.x86_64 0:0.8.5-2.el7 will be an update ---> Package lvm2.x86_64 7:2.02.166-1.el7 will be updated ---> Package lvm2.x86_64 7:2.02.186-7.el7_8.2 will be an update --> Processing Dependency: lvm2-libs = 7:2.02.186-7.el7_8.2 for package: 7:lvm2-2.02.186-7.el7_8.2.x86_64 --> Processing Dependency: libdevmapper.so.1.02(DM_1_02_141)(64bit) for package: 7:lvm2-2.02.186-7.el7_8.2.x86_64 --> Processing Dependency: libdevmapper.so.1.02(DM_1_02_138)(64bit) for package: 7:lvm2-2.02.186-7.el7_8.2.x86_64 ---> Package yum-utils.noarch 0:1.1.31-40.el7 will be updated ---> Package yum-utils.noarch 0:1.1.31-54.el7_8 will be an update --> Running transaction check ---> Package device-mapper-libs.x86_64 7:1.02.135-1.el7 will be updated --> Processing Dependency: device-mapper-libs = 7:1.02.135-1.el7 for package: 7:device-mapper-1.02.135-1.el7.x86_64 ---> Package device-mapper-libs.x86_64 7:1.02.164-7.el7_8.2 will be an update ---> Package lvm2-libs.x86_64 7:2.02.166-1.el7 will be updated --> Processing Dependency: lvm2-libs = 7:2.02.166-1.el7 for package: 7:lvm2-python-libs-2.02.166-1.el7.x86_64 ---> Package lvm2-libs.x86_64 7:2.02.186-7.el7_8.2 will be an update --> Processing Dependency: device-mapper-event = 7:1.02.164-7.el7_8.2 for package: 7:lvm2-libs-2.02.186-7.el7_8.2.x86_64 --> Running transaction check ---> Package device-mapper.x86_64 7:1.02.135-1.el7 will be updated ---> Package device-mapper.x86_64 7:1.02.164-7.el7_8.2 will be an update ---> Package device-mapper-event.x86_64 7:1.02.135-1.el7 will be updated ---> Package device-mapper-event.x86_64 7:1.02.164-7.el7_8.2 will be an update --> Processing Dependency: device-mapper-event-libs = 7:1.02.164-7.el7_8.2 for package: 7:device-mapper-event-1.02.164-7.el7_8.2.x86_64 ---> Package lvm2-python-libs.x86_64 7:2.02.166-1.el7 will be updated ---> Package lvm2-python-libs.x86_64 7:2.02.186-7.el7_8.2 will be an update --> Running transaction check ---> Package device-mapper-event-libs.x86_64 7:1.02.135-1.el7 will be updated ---> Package device-mapper-event-libs.x86_64 7:1.02.164-7.el7_8.2 will be an update --> Finished Dependency Resolution Dependencies Resolved ======================================================================================================================== Package Arch Version Repository Size ======================================================================================================================== Updating: device-mapper-persistent-data x86_64 0.8.5-2.el7 base 422 k lvm2 x86_64 7:2.02.186-7.el7_8.2 updates 1.3 M yum-utils noarch 1.1.31-54.el7_8 updates 122 k Updating for dependencies: device-mapper x86_64 7:1.02.164-7.el7_8.2 updates 295 k device-mapper-event x86_64 7:1.02.164-7.el7_8.2 updates 191 k device-mapper-event-libs x86_64 7:1.02.164-7.el7_8.2 updates 190 k device-mapper-libs x86_64 7:1.02.164-7.el7_8.2 updates 324 k lvm2-libs x86_64 7:2.02.186-7.el7_8.2 updates 1.1 M lvm2-python-libs x86_64 7:2.02.186-7.el7_8.2 updates 188 k Transaction Summary ======================================================================================================================== Upgrade 3 Packages (+6 Dependent packages) Total download size: 4.1 M Downloading packages: No Presto metadata available for base No Presto metadata available for updates (1/9): device-mapper-1.02.164-7.el7_8.2.x86_64.rpm | 295 kB 00:00:00 (2/9): device-mapper-event-libs-1.02.164-7.el7_8.2.x86_64.rpm | 190 kB 00:00:00 (3/9): device-mapper-event-1.02.164-7.el7_8.2.x86_64.rpm | 191 kB 00:00:00 (4/9): device-mapper-libs-1.02.164-7.el7_8.2.x86_64.rpm | 324 kB 00:00:00 (5/9): lvm2-libs-2.02.186-7.el7_8.2.x86_64.rpm | 1.1 MB 00:00:00 (6/9): lvm2-2.02.186-7.el7_8.2.x86_64.rpm | 1.3 MB 00:00:00 (7/9): device-mapper-persistent-data-0.8.5-2.el7.x86_64.rpm | 422 kB 00:00:00 (8/9): yum-utils-1.1.31-54.el7_8.noarch.rpm | 122 kB 00:00:00 (9/9): lvm2-python-libs-2.02.186-7.el7_8.2.x86_64.rpm | 188 kB 00:00:00 ------------------------------------------------------------------------------------------------------------------------ Total 4.2 MB/s | 4.1 MB 00:00:00 Running transaction check Running transaction test Transaction test succeeded Running transaction Warning: RPMDB altered outside of yum. ** Found 3 pre-existing rpmdb problem(s), 'yum check' output follows: ipa-client-4.4.0-12.el7.centos.x86_64 has installed conflicts freeipa-client: ipa-client-4.4.0-12.el7.centos.x86_64 ipa-client-common-4.4.0-12.el7.centos.noarch has installed conflicts freeipa-client-common: ipa-client-common-4.4.0-12.el7.centos.noarch ipa-common-4.4.0-12.el7.centos.noarch has installed conflicts freeipa-common: ipa-common-4.4.0-12.el7.centos.noarch Updating : 7:device-mapper-1.02.164-7.el7_8.2.x86_64 1/18 Updating : 7:device-mapper-libs-1.02.164-7.el7_8.2.x86_64 2/18 Updating : 7:device-mapper-event-libs-1.02.164-7.el7_8.2.x86_64 3/18 Updating : 7:device-mapper-event-1.02.164-7.el7_8.2.x86_64 4/18 Updating : 7:lvm2-libs-2.02.186-7.el7_8.2.x86_64 5/18 Updating : device-mapper-persistent-data-0.8.5-2.el7.x86_64 6/18 Updating : 7:lvm2-2.02.186-7.el7_8.2.x86_64 7/18 Updating : 7:lvm2-python-libs-2.02.186-7.el7_8.2.x86_64 8/18 Updating : yum-utils-1.1.31-54.el7_8.noarch 9/18 Cleanup : 7:lvm2-2.02.166-1.el7.x86_64 10/18 Cleanup : 7:lvm2-python-libs-2.02.166-1.el7.x86_64 11/18 Cleanup : yum-utils-1.1.31-40.el7.noarch 12/18 Cleanup : 7:lvm2-libs-2.02.166-1.el7.x86_64 13/18 Cleanup : 7:device-mapper-event-1.02.135-1.el7.x86_64 14/18 Cleanup : 7:device-mapper-event-libs-1.02.135-1.el7.x86_64 15/18 Cleanup : 7:device-mapper-1.02.135-1.el7.x86_64 16/18 Cleanup : 7:device-mapper-libs-1.02.135-1.el7.x86_64 17/18 Cleanup : device-mapper-persistent-data-0.6.3-1.el7.x86_64 18/18 Verifying : 7:device-mapper-event-1.02.164-7.el7_8.2.x86_64 1/18 Verifying : device-mapper-persistent-data-0.8.5-2.el7.x86_64 2/18 Verifying : 7:lvm2-libs-2.02.186-7.el7_8.2.x86_64 3/18 Verifying : 7:lvm2-2.02.186-7.el7_8.2.x86_64 4/18 Verifying : 7:device-mapper-libs-1.02.164-7.el7_8.2.x86_64 5/18 Verifying : 7:lvm2-python-libs-2.02.186-7.el7_8.2.x86_64 6/18 Verifying : yum-utils-1.1.31-54.el7_8.noarch 7/18 Verifying : 7:device-mapper-1.02.164-7.el7_8.2.x86_64 8/18 Verifying : 7:device-mapper-event-libs-1.02.164-7.el7_8.2.x86_64 9/18 Verifying : 7:device-mapper-event-1.02.135-1.el7.x86_64 10/18 Verifying : 7:device-mapper-event-libs-1.02.135-1.el7.x86_64 11/18 Verifying : 7:lvm2-2.02.166-1.el7.x86_64 12/18 Verifying : yum-utils-1.1.31-40.el7.noarch 13/18 Verifying : device-mapper-persistent-data-0.6.3-1.el7.x86_64 14/18 Verifying : 7:lvm2-python-libs-2.02.166-1.el7.x86_64 15/18 Verifying : 7:device-mapper-libs-1.02.135-1.el7.x86_64 16/18 Verifying : 7:device-mapper-1.02.135-1.el7.x86_64 17/18 Verifying : 7:lvm2-libs-2.02.166-1.el7.x86_64 18/18 Updated: device-mapper-persistent-data.x86_64 0:0.8.5-2.el7 lvm2.x86_64 7:2.02.186-7.el7_8.2 yum-utils.noarch 0:1.1.31-54.el7_8 Dependency Updated: device-mapper.x86_64 7:1.02.164-7.el7_8.2 device-mapper-event.x86_64 7:1.02.164-7.el7_8.2 device-mapper-event-libs.x86_64 7:1.02.164-7.el7_8.2 device-mapper-libs.x86_64 7:1.02.164-7.el7_8.2 lvm2-libs.x86_64 7:2.02.186-7.el7_8.2 lvm2-python-libs.x86_64 7:2.02.186-7.el7_8.2 Complete!3、安装Docker
[root@lhrdocker yum.repos.d]# yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.reepo
Loaded plugins: fastestmirror, langpacks
adding repo from: http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
grabbing file http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
repo saved to /etc/yum.repos.d/docker-ce.repo
[root@lhrdocker yum.repos.d]# yum -y install docker-ce docker-ce-cli containerd.io
Loaded plugins: fastestmirror, langpacks
docker-ce-stable | 3.5 kB 00:00:00
(1/2): docker-ce-stable/x86_64/primary_db | 45 kB 00:00:00
(2/2): docker-ce-stable/x86_64/updateinfo | 55 B 00:00:00
Loading mirror speeds from cached hostfile
* base: mirrors.aliyun.com
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
Resolving Dependencies
--> Running transaction check
---> Package containerd.io.x86_64 0:1.2.13-3.2.el7 will be installed
--> Processing Dependency: container-selinux >= 2:2.74 for package: containerd.io-1.2.13-3.2.el7.x86_64
---> Package docker-ce.x86_64 3:19.03.12-3.el7 will be installed
---> Package docker-ce-cli.x86_64 1:19.03.12-3.el7 will be installed
--> Running transaction check
---> Package container-selinux.noarch 2:2.119.1-1.c57a6f9.el7 will be installed
--> Processing Dependency: selinux-policy-targeted >= 3.13.1-216.el7 for package: 2:container-selinux-2.119.1-1.c57a6f9.el7.noarch
--> Processing Dependency: selinux-policy-base >= 3.13.1-216.el7 for package: 2:container-selinux-2.119.1-1.c57a6f9.el7.noarch
--> Processing Dependency: selinux-policy >= 3.13.1-216.el7 for package: 2:container-selinux-2.119.1-1.c57a6f9.el7.noarch
--> Processing Dependency: policycoreutils >= 2.5-11 for package: 2:container-selinux-2.119.1-1.c57a6f9.el7.noarch
--> Running transaction check
---> Package policycoreutils.x86_64 0:2.5-8.el7 will be updated
--> Processing Dependency: policycoreutils = 2.5-8.el7 for package: policycoreutils-python-2.5-8.el7.x86_64
---> Package policycoreutils.x86_64 0:2.5-34.el7 will be an update
--> Processing Dependency: libsepol >= 2.5-10 for package: policycoreutils-2.5-34.el7.x86_64
--> Processing Dependency: libsemanage >= 2.5-14 for package: policycoreutils-2.5-34.el7.x86_64
--> Processing Dependency: libselinux-utils >= 2.5-14 for package: policycoreutils-2.5-34.el7.x86_64
---> Package selinux-policy.noarch 0:3.13.1-102.el7 will be updated
---> Package selinux-policy.noarch 0:3.13.1-266.el7 will be an update
---> Package selinux-policy-targeted.noarch 0:3.13.1-102.el7 will be updated
---> Package selinux-policy-targeted.noarch 0:3.13.1-266.el7 will be an update
--> Running transaction check
---> Package libselinux-utils.x86_64 0:2.5-6.el7 will be updated
---> Package libselinux-utils.x86_64 0:2.5-15.el7 will be an update
--> Processing Dependency: libselinux(x86-64) = 2.5-15.el7 for package: libselinux-utils-2.5-15.el7.x86_64
---> Package libsemanage.x86_64 0:2.5-4.el7 will be updated
--> Processing Dependency: libsemanage = 2.5-4.el7 for package: libsemanage-python-2.5-4.el7.x86_64
---> Package libsemanage.x86_64 0:2.5-14.el7 will be an update
---> Package libsepol.x86_64 0:2.5-6.el7 will be updated
---> Package libsepol.x86_64 0:2.5-10.el7 will be an update
---> Package policycoreutils-python.x86_64 0:2.5-8.el7 will be updated
---> Package policycoreutils-python.x86_64 0:2.5-34.el7 will be an update
--> Processing Dependency: setools-libs >= 3.3.8-4 for package: policycoreutils-python-2.5-34.el7.x86_64
--> Running transaction check
---> Package libselinux.x86_64 0:2.5-6.el7 will be updated
--> Processing Dependency: libselinux(x86-64) = 2.5-6.el7 for package: libselinux-python-2.5-6.el7.x86_64
---> Package libselinux.x86_64 0:2.5-15.el7 will be an update
---> Package libsemanage-python.x86_64 0:2.5-4.el7 will be updated
---> Package libsemanage-python.x86_64 0:2.5-14.el7 will be an update
---> Package setools-libs.x86_64 0:3.3.8-1.1.el7 will be updated
---> Package setools-libs.x86_64 0:3.3.8-4.el7 will be an update
--> Running transaction check
---> Package libselinux-python.x86_64 0:2.5-6.el7 will be updated
---> Package libselinux-python.x86_64 0:2.5-15.el7 will be an update
--> Finished Dependency Resolution
Dependencies Resolved
========================================================================================================================
Package Arch Version Repository Size
========================================================================================================================
Installing:
containerd.io x86_64 1.2.13-3.2.el7 docker-ce-stable 25 M
docker-ce x86_64 3:19.03.12-3.el7 docker-ce-stable 24 M
docker-ce-cli x86_64 1:19.03.12-3.el7 docker-ce-stable 38 M
Installing for dependencies:
container-selinux noarch 2:2.119.1-1.c57a6f9.el7 extras 40 k
Updating for dependencies:
libselinux x86_64 2.5-15.el7 base 162 k
libselinux-python x86_64 2.5-15.el7 base 236 k
libselinux-utils x86_64 2.5-15.el7 base 151 k
libsemanage x86_64 2.5-14.el7 base 151 k
libsemanage-python x86_64 2.5-14.el7 base 113 k
libsepol x86_64 2.5-10.el7 base 297 k
policycoreutils x86_64 2.5-34.el7 base 917 k
policycoreutils-python x86_64 2.5-34.el7 base 457 k
selinux-policy noarch 3.13.1-266.el7 base 497 k
selinux-policy-targeted noarch 3.13.1-266.el7 base 7.0 M
setools-libs x86_64 3.3.8-4.el7 base 620 k
Transaction Summary
========================================================================================================================
Install 3 Packages (+ 1 Dependent package)
Upgrade ( 11 Dependent packages)
Total download size: 98 M
Downloading packages:
No Presto metadata available for base
(1/15): container-selinux-2.119.1-1.c57a6f9.el7.noarch.rpm | 40 kB 00:00:00
warning: /var/cache/yum/x86_64/7/docker-ce-stable/packages/docker-ce-19.03.12-3.el7.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 621e9f35: NOKEY
Public key for docker-ce-19.03.12-3.el7.x86_64.rpm is not installed
(2/15): docker-ce-19.03.12-3.el7.x86_64.rpm | 24 MB 00:00:23
(3/15): libselinux-python-2.5-15.el7.x86_64.rpm | 236 kB 00:00:00
(4/15): libselinux-2.5-15.el7.x86_64.rpm | 162 kB 00:00:00
(5/15): libsemanage-2.5-14.el7.x86_64.rpm | 151 kB 00:00:00
(6/15): libsemanage-python-2.5-14.el7.x86_64.rpm | 113 kB 00:00:00
(7/15): libselinux-utils-2.5-15.el7.x86_64.rpm | 151 kB 00:00:00
(8/15): libsepol-2.5-10.el7.x86_64.rpm | 297 kB 00:00:00
(9/15): policycoreutils-2.5-34.el7.x86_64.rpm | 917 kB 00:00:00
selinux-policy-targeted-3.13.1 FAILED
http://mirrors.cloud.aliyuncs.com/centos/7/os/x86_64/Packages/selinux-policy-targeted-3.13.1-266.el7.noarch.rpm: [Errno 14] curl#6 - "Could not resolve host: mirrors.cloud.aliyuncs.com; Name or service not known"
Trying other mirror.
(10/15): policycoreutils-python-2.5-34.el7.x86_64.rpm | 457 kB 00:00:00
(11/15): setools-libs-3.3.8-4.el7.x86_64.rpm | 620 kB 00:00:00
(12/15): selinux-policy-3.13.1-266.el7.noarch.rpm | 497 kB 00:00:01
(13/15): selinux-policy-targeted-3.13.1-266.el7.noarch.rpm | 7.0 MB 00:00:05
(14/15): containerd.io-1.2.13-3.2.el7.x86_64.rpm | 25 MB 00:00:36
(15/15): docker-ce-cli-19.03.12-3.el7.x86_64.rpm | 38 MB 00:00:20
------------------------------------------------------------------------------------------------------------------------
Total 2.3 MB/s | 98 MB 00:00:43
Retrieving key from https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
Importing GPG key 0x621E9F35:
Userid : "Docker Release (CE rpm) "
Fingerprint: 060a 61c5 1b55 8a7f 742b 77aa c52f eb6b 621e 9f35
From : https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Updating : libsepol-2.5-10.el7.x86_64 1/26
Updating : libselinux-2.5-15.el7.x86_64 2/26
Updating : libsemanage-2.5-14.el7.x86_64 3/26
Updating : libselinux-utils-2.5-15.el7.x86_64 4/26
Updating : policycoreutils-2.5-34.el7.x86_64 5/26
Updating : selinux-policy-3.13.1-266.el7.noarch 6/26
Updating : selinux-policy-targeted-3.13.1-266.el7.noarch 7/26
Updating : libsemanage-python-2.5-14.el7.x86_64 8/26
Updating : setools-libs-3.3.8-4.el7.x86_64 9/26
Updating : libselinux-python-2.5-15.el7.x86_64 10/26
Updating : policycoreutils-python-2.5-34.el7.x86_64 11/26
Installing : 2:container-selinux-2.119.1-1.c57a6f9.el7.noarch 12/26
setsebool: SELinux is disabled.
Installing : containerd.io-1.2.13-3.2.el7.x86_64 13/26
Installing : 1:docker-ce-cli-19.03.12-3.el7.x86_64 14/26
Installing : 3:docker-ce-19.03.12-3.el7.x86_64 15/26
Cleanup : policycoreutils-python-2.5-8.el7.x86_64 16/26
Cleanup : selinux-policy-targeted-3.13.1-102.el7.noarch 17/26
Cleanup : selinux-policy-3.13.1-102.el7.noarch 18/26
Cleanup : policycoreutils-2.5-8.el7.x86_64 19/26
Cleanup : libselinux-utils-2.5-6.el7.x86_64 20/26
Cleanup : setools-libs-3.3.8-1.1.el7.x86_64 21/26
Cleanup : libselinux-python-2.5-6.el7.x86_64 22/26
Cleanup : libsemanage-python-2.5-4.el7.x86_64 23/26
Cleanup : libsemanage-2.5-4.el7.x86_64 24/26
Cleanup : libselinux-2.5-6.el7.x86_64 25/26
Cleanup : libsepol-2.5-6.el7.x86_64 26/26
Verifying : 2:container-selinux-2.119.1-1.c57a6f9.el7.noarch 1/26
Verifying : 1:docker-ce-cli-19.03.12-3.el7.x86_64 2/26
Verifying : libselinux-2.5-15.el7.x86_64 3/26
Verifying : policycoreutils-2.5-34.el7.x86_64 4/26
Verifying : libselinux-utils-2.5-15.el7.x86_64 5/26
Verifying : policycoreutils-python-2.5-34.el7.x86_64 6/26
Verifying : 3:docker-ce-19.03.12-3.el7.x86_64 7/26
Verifying : setools-libs-3.3.8-4.el7.x86_64 8/26
Verifying : selinux-policy-3.13.1-266.el7.noarch 9/26
Verifying : containerd.io-1.2.13-3.2.el7.x86_64 10/26
Verifying : libsemanage-python-2.5-14.el7.x86_64 11/26
Verifying : libsemanage-2.5-14.el7.x86_64 12/26
Verifying : libselinux-python-2.5-15.el7.x86_64 13/26
Verifying : libsepol-2.5-10.el7.x86_64 14/26
Verifying : selinux-policy-targeted-3.13.1-266.el7.noarch 15/26
Verifying : policycoreutils-2.5-8.el7.x86_64 16/26
Verifying : libsepol-2.5-6.el7.x86_64 17/26
Verifying : libselinux-python-2.5-6.el7.x86_64 18/26
Verifying : libselinux-utils-2.5-6.el7.x86_64 19/26
Verifying : libsemanage-python-2.5-4.el7.x86_64 20/26
Verifying : policycoreutils-python-2.5-8.el7.x86_64 21/26
Verifying : selinux-policy-3.13.1-102.el7.noarch 22/26
Verifying : libselinux-2.5-6.el7.x86_64 23/26
Verifying : selinux-policy-targeted-3.13.1-102.el7.noarch 24/26
Verifying : libsemanage-2.5-4.el7.x86_64 25/26
Verifying : setools-libs-3.3.8-1.1.el7.x86_64 26/26
Installed:
containerd.io.x86_64 0:1.2.13-3.2.el7 docker-ce.x86_64 3:19.03.12-3.el7 docker-ce-cli.x86_64 1:19.03.12-3.el7
Dependency Installed:
container-selinux.noarch 2:2.119.1-1.c57a6f9.el7
Dependency Updated:
libselinux.x86_64 0:2.5-15.el7 libselinux-python.x86_64 0:2.5-15.el7
libselinux-utils.x86_64 0:2.5-15.el7 libsemanage.x86_64 0:2.5-14.el7
libsemanage-python.x86_64 0:2.5-14.el7 libsepol.x86_64 0:2.5-10.el7
policycoreutils.x86_64 0:2.5-34.el7 policycoreutils-python.x86_64 0:2.5-34.el7
selinux-policy.noarch 0:3.13.1-266.el7 selinux-policy-targeted.noarch 0:3.13.1-266.el7
setools-libs.x86_64 0:3.3.8-4.el7
Complete!
[root@lhrdocker yum.repos.d]# docker ps
Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running?
[root@lhrdocker yum.repos.d]# systemctl start docker
systemctl status dockcker[root@lhrdocker yum.repos.d]# systemctl status docker
● docker.service - Docker Application Container Engine
Loaded: loaded (/usr/lib/systemd/system/docker.service; disabled; vendor preset: disabled)
Active: active (running) since Wed 2020-06-24 12:47:51 CST; 2s ago
Docs: https://docs.docker.com
Main PID: 9438 (dockerd)
Memory: 38.3M
CGroup: /system.slice/docker.service
└─9438 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock
Jun 24 12:47:50 lhrdocker dockerd[9438]: time="2020-06-24T12:47:50.751029389+08:00" level=info msg="ccResolverWr...=grpc
Jun 24 12:47:50 lhrdocker dockerd[9438]: time="2020-06-24T12:47:50.751035457+08:00" level=info msg="ClientConn s...=grpc
Jun 24 12:47:50 lhrdocker dockerd[9438]: time="2020-06-24T12:47:50.784895620+08:00" level=info msg="Loading cont...art."
Jun 24 12:47:50 lhrdocker dockerd[9438]: time="2020-06-24T12:47:50.874834656+08:00" level=info msg="Default brid...ress"
Jun 24 12:47:50 lhrdocker dockerd[9438]: time="2020-06-24T12:47:50.962577618+08:00" level=info msg="Loading cont...one."
Jun 24 12:47:50 lhrdocker dockerd[9438]: time="2020-06-24T12:47:50.983199649+08:00" level=warning msg="Not using...rlay2
Jun 24 12:47:50 lhrdocker dockerd[9438]: time="2020-06-24T12:47:50.983362127+08:00" level=info msg="Docker daemo...03.12
Jun 24 12:47:50 lhrdocker dockerd[9438]: time="2020-06-24T12:47:50.983421645+08:00" level=info msg="Daemon has c...tion"
Jun 24 12:47:51 lhrdocker dockerd[9438]: time="2020-06-24T12:47:51.066011655+08:00" level=info msg="API listen o...sock"
Jun 24 12:47:51 lhrdocker systemd[1]: Started Docker Application Container Engine.
Hint: Some lines were ellipsized, use -l to show in full.
[root@lhrdocker yum.repos.d]# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
[root@lhrdocker yum.repos.d]#
[root@lhrdocker yum.repos.d]# docker version
Client: Docker Engine - Community
Version: 19.03.12
API version: 1.40
Go version: go1.13.10
Git commit: 48a66213fe
Built: Mon Jun 22 15:46:54 2020
OS/Arch: linux/amd64
Experimental: false
Server: Docker Engine - Community
Engine:
Version: 19.03.12
API version: 1.40 (minimum version 1.12)
Go version: go1.13.10
Git commit: 48a66213fe
Built: Mon Jun 22 15:45:28 2020
OS/Arch: linux/amd64
Experimental: false
containerd:
Version: 1.2.13
GitCommit: 7ad184331fa3e55e52b890ea95e65ba581ae3429
runc:
Version: 1.0.0-rc10
GitCommit: dc9208a3303feef5b3839f4323d9beb36df0a9dd
docker-init:
Version: 0.18.0
GitCommit: fec3683
[root@lhrdocker yum.repos.d]# docker info
Client:
Debug Mode: false
Server:
Containers: 0
Running: 0
Paused: 0
Stopped: 0
Images: 0
Server Version: 19.03.12
Storage Driver: overlay2
Backing Filesystem: extfs
Supports d_type: true
Native Overlay Diff: false
Logging Driver: json-file
Cgroup Driver: cgroupfs
Plugins:
Volume: local
Network: bridge host ipvlan macvlan null overlay
Log: awslogs fluentd gcplogs gelf journald json-file local logentries splunk syslog
Swarm: inactive
Runtimes: runc
Default Runtime: runc
Init Binary: docker-init
containerd version: 7ad184331fa3e55e52b890ea95e65ba581ae3429
runc version: dc9208a3303feef5b3839f4323d9beb36df0a9dd
init version: fec3683
Security Options:
seccomp
Profile: default
Kernel Version: 3.10.0-514.el7.x86_64
Operating System: CentOS Linux 7 (Core)
OSType: linux
Architecture: x86_64
CPUs: 1
Total Memory: 3.695GiB
Name: lhrdocker
ID: YBFL:WNPR:Y2XV:RPJQ:JYGA:XOXN:YXJL:EO2J:UFFO:JVBW:AZHF:TYME
Docker Root Dir: /var/lib/docker
Debug Mode: false
Registry: https://index.docker.io/v1/
Labels:
Experimental: false
Insecure Registries:
127.0.0.0/8
Live Restore Enabled: false
四、一键安装Docker
我们也可以一键安装Docker，如下：
[root@lhrdocker ~]# docker ps
bash: docker: command not found...
[root@lhrdocker ~]# curl -fsSL get.docker.com -o get-docker.sh
[root@lhrdocker ~]# ll
total 56
-rw-------. 1 root root 2152 Sep 13 2018 anaconda-ks.cfg
drwxr-xr-x. 2 root root 4096 Sep 12 2018 Desktop
drwxr-xr-x. 2 root root 4096 Sep 12 2018 Documents
drwxr-xr-x. 2 root root 4096 Sep 12 2018 Downloads
-rw-r--r-- 1 root root 13857 Jun 24 12:57 get-docker.sh
-rw-r--r--. 1 root root 2256 Sep 13 2018 initial-setup-ks.cfg
drwxr-xr-x. 2 root root 4096 Sep 12 2018 Music
drwxr-xr-x. 2 root root 4096 Sep 12 2018 Pictures
drwxr-xr-x. 2 root root 4096 Sep 12 2018 Public
drwxr-xr-x. 2 root root 4096 Sep 12 2018 Templates
drwxr-xr-x. 2 root root 4096 Sep 12 2018 Videos
[root@lhrdocker ~]# sh get-docker.sh
# Executing docker install script, commit: 26ff363bcf3b3f5a00498ac43694bf1c7d9ce16c
+ sh -c 'yum install -y -q yum-utils'
http://mirrors.aliyuncs.com/centos/7/os/x86_64/repodata/f09552edffa70f49f553e411c2282fbccfffbeafa21e81e32622b103038b8bae-primary.sqlite.bz2: [Errno 14] curl#7 - "Failed connect to mirrors.aliyuncs.com:80; Connection refused"
Trying other mirror.
No Presto metadata available for updates
Warning: RPMDB altered outside of yum.
** Found 3 pre-existing rpmdb problem(s), 'yum check' output follows:
ipa-client-4.4.0-12.el7.centos.x86_64 has installed conflicts freeipa-client: ipa-client-4.4.0-12.el7.centos.x86_64
ipa-client-common-4.4.0-12.el7.centos.noarch has installed conflicts freeipa-client-common: ipa-client-common-4.4.0-12.el7.centos.noarch
ipa-common-4.4.0-12.el7.centos.noarch has installed conflicts freeipa-common: ipa-common-4.4.0-12.el7.centos.noarch
+ sh -c 'yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo'
Loaded plugins: fastestmirror, langpacks
adding repo from: https://download.docker.com/linux/centos/docker-ce.repo
grabbing file https://download.docker.com/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
repo saved to /etc/yum.repos.d/docker-ce.repo
+ '[' stable '!=' stable ']'
+ sh -c 'yum makecache'
Loaded plugins: fastestmirror, langpacks
base | 3.6 kB 00:00:00
docker-ce-stable | 3.5 kB 00:00:00
epel | 4.7 kB 00:00:00
extras | 2.9 kB 00:00:00
updates | 2.9 kB 00:00:00
(1/9): epel/x86_64/prestodelta | 2.0 kB 00:00:00
(2/9): base/7/x86_64/other_db | 2.6 MB 00:00:00
(3/9): extras/7/x86_64/filelists_db | 205 kB 00:00:00
(4/9): extras/7/x86_64/other_db | 122 kB 00:00:00
(5/9): updates/7/x86_64/other_db | 238 kB 00:00:00
(6/9): updates/7/x86_64/filelists_db | 1.6 MB 00:00:02
(7/9): epel/x86_64/other_db | 3.3 MB 00:00:05
(8/9): base/7/x86_64/filelists_db | 7.1 MB 00:00:06
(9/9): epel/x86_64/filelists_db | 12 MB 00:00:07
Loading mirror speeds from cached hostfile
* base: mirrors.aliyun.com
* extras: mirrors.aliyun.com
* updates: mirrors.aliyun.com
Metadata Cache Created
+ '[' -n '' ']'
+ sh -c 'yum install -y -q docker-ce'
No Presto metadata available for base
warning: /var/cache/yum/x86_64/7/docker-ce-stable/packages/docker-ce-19.03.12-3.el7.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 621e9f35: NOKEY
Public key for docker-ce-19.03.12-3.el7.x86_64.rpm is not installed
Importing GPG key 0x621E9F35:
Userid : "Docker Release (CE rpm) "
Fingerprint: 060a 61c5 1b55 8a7f 742b 77aa c52f eb6b 621e 9f35
From : https://download.docker.com/linux/centos/gpg
setsebool: SELinux is disabled.
If you would like to use Docker as a non-root user, you should now consider
adding your user to the "docker" group with something like:
sudo usermod -aG docker your-user
Remember that you will have to log out and back in for this to take effect!
WARNING: Adding a user to the "docker" group will grant the ability to run
containers which can be used to obtain root privileges on the
docker host.
Refer to https://docs.docker.com/engine/security/security/#docker-daemon-attack-surface
for more information.
[root@lhrdocker ~]# If you would like to use Docker as a non-root user, you should now consider
adding your user to the "docker" group with something like:
sudo usermod -aG docker your-user
Remember that you will have to log out and back in for this to take effect!
WARNING: Adding a user to the "docker" group will grant the ability to run
containers which can be used to obtain root privileges on the
docker host.
Refer to https://docs.docker.com/engine/security/security/#docker-daemon-attack-surface
for more information.
[root@lhrdocker ~]# d
[root@lhrdocker ~]# docker ps
Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running?
[root@lhrdocker ~]# systemctl start docker
systemctl status docker[root@lhrdocker ~]# systemctl status docker
● docker.service - Docker Application Container Engine
Loaded: loaded (/usr/lib/systemd/system/docker.service; disabled; vendor preset: disabled)
Active: active (running) since Wed 2020-06-24 13:12:56 CST; 1s ago
Docs: https://docs.docker.com
Main PID: 9348 (dockerd)
Memory: 38.4M
CGroup: /system.slice/docker.service
└─9348 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock
Jun 24 13:12:56 lhrdocker dockerd[9348]: time="2020-06-24T13:12:56.403432651+08:00" level=info msg="ccResolverWrappe...e=grpc
Jun 24 13:12:56 lhrdocker dockerd[9348]: time="2020-06-24T13:12:56.403438749+08:00" level=info msg="ClientConn switc...e=grpc
Jun 24 13:12:56 lhrdocker dockerd[9348]: time="2020-06-24T13:12:56.422565741+08:00" level=info msg="Loading containe...tart."
Jun 24 13:12:56 lhrdocker dockerd[9348]: time="2020-06-24T13:12:56.498364397+08:00" level=info msg="Default bridge (...dress"
Jun 24 13:12:56 lhrdocker dockerd[9348]: time="2020-06-24T13:12:56.586263842+08:00" level=info msg="Loading containe...done."
Jun 24 13:12:56 lhrdocker dockerd[9348]: time="2020-06-24T13:12:56.614176483+08:00" level=warning msg="Not using nat...erlay2
Jun 24 13:12:56 lhrdocker dockerd[9348]: time="2020-06-24T13:12:56.614312232+08:00" level=info msg="Docker daemon" c....03.12
Jun 24 13:12:56 lhrdocker dockerd[9348]: time="2020-06-24T13:12:56.614366802+08:00" level=info msg="Daemon has compl...ation"
Jun 24 13:12:56 lhrdocker dockerd[9348]: time="2020-06-24T13:12:56.700953028+08:00" level=info msg="API listen on /v....sock"
Jun 24 13:12:56 lhrdocker systemd[1]: Started Docker Application Container Engine.
Hint: Some lines were ellipsized, use -l to show in full.
[root@lhrdocker ~]# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
[root@lhrdocker ~]#
到此为止，Docker软件安装完成。
——————————————————————————————————————————
【干货来了|小麦苗IT资料分享】 ★小麦苗DB职场干货：https://mp.weixin.qq.com/s/Vm5PqNcDcITkOr9cQg6T7w ★小麦苗数据库健康检查：https://share.weiyun.com/5lb2U2M ★小麦苗微店：https://weidian.com/s/793741433?wfr=c&ifr=shopdetail ★各种操作系统下的数据库安装文件（Linux、Windows、AIX等）：https://pan.baidu.com/s/19yJdUQhGz2hTgozb9ATdAw 提取码：4xpv ★小麦苗分享的资料：https://share.weiyun.com/57HUxNi ★小麦苗课堂资料：https://share.weiyun.com/5fAdN5m ★小麦苗课堂试听资料：https://share.weiyun.com/5HnQEuL ★小麦苗出版的相关书籍：https://share.weiyun.com/5sQBQpY ★小麦苗博客文章：https://share.weiyun.com/5ufi4Dx ★数据库系列（Oracle、MySQL、NoSQL）：https://share.weiyun.com/5n1u8gv ★公开课录像文件：https://share.weiyun.com/5yd7ukG ★其它常用软件分享：https://share.weiyun.com/53BlaHX ★其它IT资料（OS、网络、存储等）：https://share.weiyun.com/5Mn6ESi ★Python资料：https://share.weiyun.com/5iuQ2Fn ★已安装配置好的虚拟机：https://share.weiyun.com/5E8pxvT ——————————————————————————————————————————
About Me
——————————————————————————————————————————
● 本文作者：小麦苗，部分内容整理自网络，若有侵权请联系小麦苗删除
● 《数据库笔试面试宝典》作者
● OCP、OCM、高可用（RAC+DG+OGG）网络班开讲啦，有需要的小伙伴可以私聊我
● 本文在itpub、博客园、CSDN和个人微信公众号（ xiaomaimiaolhr）上有同步更新
● 本文itpub地址： http://blog.itpub.net/26736162
● 本文博客园地址： http://www.cnblogs.com/lhrbest
● 本文CSDN地址： https://blog.csdn.net/lihuarongaini
● 本文pdf版、个人简介及小麦苗云盘地址： http://blog.itpub.net/26736162/viewspace-1624453/
● 数据库笔试面试题库及解答： http://blog.itpub.net/26736162/viewspace-2134706/
● DBA宝典今日头条号地址： http://www.toutiao.com/c/user/6401772890/#mid=1564638659405826
——————————————————————————————————————————
● QQ群号： 230161599 、618766405
● 微信群：可加我微信，我拉大家进群，非诚勿扰
● 联系我请加QQ好友 （ 646634621 ），注明添加缘由
● 于 2019-10-01 06:00 ~ 2019-10-31 24:00 在西安完成
● 最新修改时间：2019-10-01 06:00 ~ 2019-10-31 24:00
● 文章内容来源于小麦苗的学习笔记，部分整理自网络，若有侵权或不当之处还请谅解
● 版权所有，欢迎分享本文，转载请保留出处
——————————————————————————————————————————
●小麦苗的微店： https://weidian.com/s/793741433?wfr=c&ifr=shopdetail
●小麦苗出版的数据库类丛书： http://blog.itpub.net/26736162/viewspace-2142121/
●小麦苗OCP、OCM、高可用网络班： http://blog.itpub.net/26736162/viewspace-2148098/
●小麦苗腾讯课堂主页： https://lhr.ke.qq.com/
——————————————————————————————————————————
使用微信客户端扫描下面的二维码来关注小麦苗的微信公众号（ xiaomaimiaolhr）
及QQ群（DBA宝典）、添加小麦苗微信， 学习最实用的数据库技术。
——————————————————————————————————————————
